Alex Syberia Copic Coloured Slim Line Card with Gold Accents

Hi guys!

Today’s post is all about this slim line card, and lots and LOTS of copic colouring. The Fabulous Floral Slimline Panel from Alex Syberia Designs has become a bit of a fave with me, I love those big florals and think it’s just fab.

I’ve gone for a deep fuchsia/dark pink colour scheme this time. It’s quite dramatic and I’ve seen lots of colour combos used for this, just check out the rest of the design team for inspiration.

The Copics I’ve used are all lined up in the photo but just in case you can’t see it it’s, from darkest to lightest, RV69, RV66, RV19, RV17, RV55, R83 and R81.

I’ve gone in a flicking motion for most of the flowers, but did blend a bit to get those colours smooth. At the end, I did go in with more of the darkest colours to bring back more of a contrast in the middle.

When I had finished the colouring I fussy cut the flowers out, because I wanted to have a different background for the card, rather than a coloured one.

On a slim line card base, I added Gold String washi tape from Altenew and wrapped it around the edges to keep it clean looking. The washi tape wasn’t wide enough to go across the entire panel, so I had to use two pieces, however the gaps will be covered up by the flowers.

To finish off the card I heat embossed a sentiment from the Pure Magic stamp set from Ellen Hutson, in Rich Gold embossing powder from WOW! Embossing, on black card stock. I used my anti-static tool on the card stock first, to avoid stray powder getting where I didn’t want it, then stamped it up with WOW! Embossing ink. Once this was set with the heat tool, I trimmed it down and adhered it to the card. It needed a little something else so I also added a ‘love’ diecut and some matte gold sequins.

With that, I’m all done for today but I hope you like the card! I have used some compensated affiliate links in this post, at no extra cost to you, as well as a link to the digi stamp used, for your convenience. If you shop using any of the links that are affiliate links, I get a small commission from the company directly, as a thank you for directing you to them. This does not cost you a penny extra at all, and any earnings I get from these go directly back into the running of my blog, YouTube channel and Instagram.

Lots of love and happy crafting from Erica

Below you can find affiliate links to Ellen Hutson, with some suitable alternatives to the items not found in her shop.

Alex Syberia March Release! Copic coloring on vellum.

Hi guys!

Today is release day for Alex Syberia’s March release of digital stamps, and as always, she has some amazing designs for us!

I started out with the Fabulous Floral slim line flowers and printed it on vellum. The upside with having a laser printer is that I can foil the images, which always looks fab! This one I foiled with white Minc foil, using my Minc machine.

To add some colour, I turned it over and used Copics, on the back. When using this technique, you do have to add quite a lot of colours, or strong ones, in order for it to show through the vellum.

When the colouring was done, I gently wrapped the vellum piece over a white slim line card base, and glued down the sides to the back so it wouldn’t show.

To finish this off, I used a discontinued, but loved, word die from Neat & Tangled that says ‘love you’ in a gorgeous font. The paper I used is homemade shimmer paper! You can make your own by smearing Paper Glaze from Picket Fence Studios on card stock, let it dry and voilá!

I cut out another two layers and added these together with liquid glue, before adhering the whole thing to the card. Layering word dies up is such a simple but effective way of taking your card designs up a notch, with little effort. This word die is sold out in a LOT of places, and the only shop I found it actually in stock is Foiled Fox, so if you want it, GRAB IT FAST!!

To celebrate the release the design team are doing an instagram hop, where you can see some fantastic inspiration and hop along for a chance to win a gift voucher to the Alex Syberia shop! I have seen some of the cards, and they are AH-mazing! You are not going to want to miss it.

You can of course use skip straight to Alex’s shop if you already know you are going to want to get some of these for yourself.

Thanks for stopping by today, I hope you enjoyed this post and will enjoy some of these new stamps for yourself.

Lots of love and happy crafting from Erica

Tonic Studios Stamp Club Compassion & Poppies Blog Hop!

Hi everyone!

Today I’m delighted to be one of the stops on the Tonic Studios Stamp Club release blog hops. This month’s bundle is called Compassion & Poppies, and consists of a stamp set and coordinating diecuts. They will only be sold as a bundle, and are exclusive to Tonic Studios so grab them while you can! Once they are sold out, they are gone!

This is a monthly stamp release, and will be available the last Friday of every month (with exceptions made for holidays) It’s not a club or subscription based program, so there is no commitment or forced buying, it’s simply a small, but fabulous, stamp release.

You can get it both from the UK Tonic Studios shop and the US Tonic Studios shop, but if you want it, make sure to get it fast. Don’t dilly-dally, the last bundle sold out so fast, so better safe than sorry!

There is of course a prize to be won, a blog hop wouldn’t be complete without one, right? One lucky winner will win the entire bundle, as well as a £50/$50 Giftcard to Tonic Studios! How is that for awesome-sauce? Leave a comment on this blog to a chance to win, and the more you hop and comment, the bigger your chance to win. Comments can be made until March 3rd 11.59PM PST/7.59am GST March 4th, and winner will be announced on March 5th!

The entire line-up can be found at the bottom of this post, and you next stop is my talented friend Janette Kausen!

So, full disclosure, my goodies only arrived 24hrs ago, so it has been a bit of a scramble. I only finished one full card but if I manage to make more, I will share them over on my Instagram.

I started by stamping the big flower image with Black Hybrid ink on Neenah paper with my MISTI, as I wanted to do some Copic colouring. I started out with reds, greens and cool greys, but decided to skip out on the greens in favour of colouring the leaves grey for a dramatic look.

A bit of masking here and there protected my flowers, and I heat embossed the two leaves from the stamp set in Platinum from WOW! Embossing powder. It goes so well with the grey on the leaves, and adds that gorgeous shine to the card. I made sure to use my anti-static tool generously before, as the paper was still a bit wet from the colouring.

I used my WOW! heat tool to set the powder. I love this tool, thanks to the dual settings you have so much more control over the heat and that’s always a good thing.

To add some drama to the card, I ink blended some Hickory Smoke and Black Soot around the edges, using my Blender Brushes. This not only adds drama, but also draws the eye in to the star of the show: the poppies.

The final touch was to heat emboss one of the sentiments onto black card stock. I used Platinum again, for a cohesive look, and trimmed it down to a slim banner before adhering it with liquid glue.

Well, that’s it from me for now, and it’s time to hop on. Or get your shop on! I have used some compensated affiliate links in this post, for your convenience. These links do not cost you anything extra at all, however if you use them I get a small commission from the company directly. Any earnings I get from these links go directly back into the running of my blog, YouTube channel and Instagram. I am so grateful for the support, and can’t do it without you so thank you from the bottom of my heart.

BLOG HOP LIST: 

Channin Pelletier

Dilay Nacar

Emily Midgett

Erica Andersson Burke

Janette Kausen

Jen Kray

Kelly Taylor

Maria Willis

Mindy Eggen

Seeka

Christmas Card Collaboration with Courtney Kroeber

Ho, ho, ho, my merry peeps!

Today’s post is the corresponding blog post for a YouTube video that’s up on my channel today. I’m collaborating with Courtney Kroeber for her 25 Days Of Christmas Cards series and we decided on Copic coloring for our cards.

Now, this might come as a shock as colouring is basically the theme of this card, but I have not used a single stamp set here!! Not a one! Say whaaaaat? I decided to use the Strings Of Lights diecuts from Lawn Fawn and cut out lots of the baubles out of Copic friendly card stock, and these I have coloured.

To get these looking as lifelike as possible, I have used quite a few markers on each one. Going from dark at the edges and lighter and lighter towards the middle.

The screw tops I had to play around with several tries before I was happy with the look. I thought blending the colours would give the most realistic look, but I was so wrong! In the end, what I liked best was using C4 with light flicks, and then going in with C5 to add depth and the illusion of the curve.

With a huge selection of baubles coloured, it was time to think about the actual card base. I had an idea in my head, and went about trying to make it come to life but man… it was a bit more trouble than I thought! The idea was to use the Take A Bough Encore dies from Concord & 9th and create a Christmas tree look. Sounds cool, right? Whilst I got there in the end, it ended up being a very heavy card! This is not one to be sent in the mail, unless you are happy to pay a lot extra for postage.

First of all I cut out a slim line panel using the Slim Line Diecutting System from Picket Fence Studios. Using this as a guide, I then absolutely COVERED it with the Take A Bough Encore pieces. These, and the background panel, are all cut out of Evergreen card stock, from Concord & 9th. When I had a good coverage around the edges, I covered them with a strip of Press’n’Seal and picked them all up. To make sure all of them would stick to the background panel I used Pritt-stick glue. Yep, very old school indeed!

When the edges glued down, I just had to cover the middle with the larger boughs. To make sure the tree looks lifelike, I didn’t cover the backs of the bough dies with glue, only the middle part.

With my “tree” done, I could start the decorating with the baubles! I cut out lots of extra string from the diecut set and then got puzzling. What I realised here though, is that I should have coloured up more of the smaller baubles, instead of going to town with the bigger ones. Admittedly they were easier to colour.

As it’s pretty obvious what occasion this card is for, I didn’t add a sentiment to the front of it. The Man actually said ‘Nobody is going to look at that and think Happy Easter’, lol!

Well, that’s it from me but I hope you get a chance to hop on over to my YouTube channel to watch the video, and then drop by Courtney’s channel to see what she made.

I have used some compensated affiliate links in this blog post, at no extra cost to you, for your convenience. Thank you so much if you shop using these links, I really appreciate the support!

Lots of love and happy crafting from Erica

You Say Witch Like It’s A Bad Thing! | STAMPtember 2019

Hi guys!

Today’s card is made with one of the Simon Says Stamp STAMPtember set from last year, If The Hat Fits, combined with their Spider Web Background stamp. I’m not much into Halloween and scary stuff, that’s just not my jam at all. Making Halloween cards, however, I for some reason, love making!

I started out by stamping up two of the hats on Neenah card stock with Black Hybrid ink from Picket Fence Studios, as this is Copic friendly.

I used quite a few of the Cool Grey Copics to colour in the hat, but still getting some highlights and contrast to it. Both hats were done in the same colours and the accessories were done in “witchy” colours.

Thankfully for me, as I’m not a fan of fussy cutting, there are coordinating diecuts for this set too, and I used them to cut out the hats.

The background is the Spider Web Background stamp, heatembossed in Opaque Bright White on Eggplant card stock from Concord & 9th. For some reason, despite using an anti-static tool on the card stock first, there was a lot of stray powder all over it and it felt too fiddly to try cleaning that up. The effect was sort of a dusty spiderweb, which actually worked out pretty cool.

To make it look a bit spookier, and also to draw the eye in, I ink blended some Black Soot with a Life Changing Blender Brush around the edges. Doing this works really well with coloured card stock, if you want to add a more dimensional look to your background.

That little piece of acetate with the PostIt tape is a clever little tool I use to keep my fingers off my project, both to avoid finger prints on my ink blending and smudging the ink. It’s super inexpensive and works a treat. After doing the ink blending, I splattered some gold water colour on it and set that aside to dry.

I also heat embossed one of the funny sentiments, from If The Hat Fits, in white on black card stock. This piece I cut out with the Stitched Circle dies, and did another one in white card stock, in the next size up.

To finish off the card I adhered all these bits and pieces to the background with Lawn Fawn glue tube. For an extra pop, I added some Glossy Accents to the green ribbon hat and to the buckle and the moon, on the other hat.

The last finishing touch were some matte black and iridescent black sequins, which I adhered with more Glossy Accents.

With that, I’m all done! I hope you found some inspiration where with me today. If you did, I’d be ever so grateful if you would use the compensated affiliate links provided in this blog post. Using these do not cost you anything extra at all, the company the links are affiliate to, pay me a small commission directly as a thank you for directing you to them. These earnings, however small, help keep my little blog, YouTube channel and Instagram feed fun and fresh for you, so thank you if you use them! It means a lot to me.

Lots of love and happy crafting from Erica

You can find me on various social media platforms if you want to see more of my work

My blog (that’s right here)

Instagram

My YouTube channel

CaCaCraft on Facebook

MFT Stamps Sketch Challenge 501

Hi!

Today’s post is based on this week’s MFT Stamps Sketch Challenge #501 and I’ve not done one of these for a while, so I thought why not?

I really wanted to use the cute dragons from the BB Magical Dragons set. With that in mind, I stamped them up on Copic friendly card stock with the PFS Black Hybrid ink, set it with my WOW! heat tool and got to work with Copics. My first dragon was done in what I picture to be a natural colour for dragons: green!

My second dragon was done in more teal-like colours, maybe she’s a girl dragon? The tummies, horns, wings and back scales on both of them were done in lighter, but still matching colours.

There were two fire bursts stamped up too, so I did these in flame colours. Deep reds with some fiery yellow. I’m so glad this set comes with coordinating Dienamics as fussy cutting is not my jam.

The background I did with the Mini Cloud stencil, one of my favourite stencils ever. I wanted a really soft look, so I didn’t add any more ink to my Life Changing Blender Brushes, just used the blues left on them. It turned out fab!

One of my newest purchases is Sparkle Spray by Nuvo Tonic Studios, and I wanted to add some sparkle to the background with this. Buuuuut… I went a little overboard, which left the background COVERED in the sparkle spray. This one is Morning Fog, and wow! I think I will be adding a few more to my arsenal.

To finish off the card, I stamped up a couple of the sentiments from the BB Magical Dragons set with Black Hybrid ink. Then I adhered the dragons and the fire bursts with Lawn Fawn liquid glue, added a little bit of Wink Of Stella to the wings and horns, and with that, the card was done! I was originally only going to add one of the fire bursts but as I went overboard with the Sparkle Spray, and it kind of looked like ash in the air after the dragon had gone to town breathing fire, I added both.

Thanks so much for stopping by today, I hope you enjoyed this card and found some inspiration here with me. I have used some compensated affiliate links in this post, at no extra cost to you. If you shop via these links I get a small commission from the company directly. Any earnings I get from these go directly back into the running of my blog, YouTube and Instagram so thank you so much for supporting me by using these. I really appreciate it a lot!

Lots of love and happy crafting from Erica

You can find me on various social media platforms if you want to see more of my work

My blog (that’s right here)

Instagram

My YouTube channel

CaCaCraft on Facebook

Picket Fence Studios June Release!

Hello, hello!

It’s the 14th, which means a new release is available from Picket Fence Studios! You can find the entire release HERE if you can’t wait to see what awesomeness is now for sale in the shop.

I have two cards to show you today, both made with the After The Storm stamp set. Both are coloured with Copic markers, but in true Erica style, both are different. I started out by stamping up the images I wanted to use with Hybrid Black Ink, and then I set it a little by using my WOW! Heat tool on it.

I wanted to make the clouds dark, ominous and look like they were ready to unleash some thunder on my first card. This look was achieved by mixing Cool Greys and some blues, as can be seen on my little tester piece above. I also have a video for this over on my YouTube channel if you want to see it more in-depth.

Once the clouds were done, I used some rainbow colours to colour in the… erm… rainbow. Like, duh. Of course I used rainbow colours! What else?? The markers I used can be seen in the photo above.

To match the rainbow on the image, I wanted to add colour to the word ‘rainbow’ in the sentiment too. With the help of my Mini MISTI, some PostIt Tape and the Atelier Inks from Ink On 3 this was a breeze!

From left to right: Marilyn Red, Marigold Orange, Bee Sting Yellow, Goddess Green, Peacock Blue and My Jam Purple. In other words, the exact colour order as the rainbow itself. Pretty neat little details, right?

To add more drama to the card, I cut out a mask and placed over the image, then I ink blended some leftover Chipped Sapphire ink onto the background. The ink that was left on my brush from another project, was just enough to add some depth. I didn’t need to get the ink pad out again. Cool, huh?

Because I’m addicted to shimmery things, I had to add some gold splatters to the card too. This I did by mixing up some Golden Rose Paper Glaze with water and splattering over the background. I removed the mask first though, as I wanted the gold all over.

This works so well! Paper Glaze really is such a versatile product! The last thing I needed to do was add the sentiment strip and the card was done.

Time to move on to card no2!

For this card I used Cool Greys again, but started with C5. On card no1 I used C7 as the darkest colour. I also created lots of texture on the clouds on this one by dabbing C00 LOTS all over the finished coloured clouds.

This rainbow got more depth and detail added to it, but using two shades of each colour. I also used the same ones, and a few extra, for the umbrella. The wellies in the image I did in a dark teal as I have a pair in that colour.

The bench was coloured in with browns, and I added a little bit of a shadow under it too. Because the sentiment was already stamped up, once the colouring was done, the card was done.

Easy peasy! I’m getting better at leaving white space and not feeling the need to fill in every single little gap with colour. Which one is your favourite? I must admin that I do love the gold sparkle on the first one and the dramatic clouds, but I like the colours used on the second one too.

Well, that’s it from me for today, but I will be back tomorrow with more cards and inspiration! If you can’t wait to shop the new release, I’d be so grateful if you would consider using the compensated affiliate links provided in this blog post. They do not cost you anything extra at all, if you do use them, the company it’s affiliated with, Picket Fence Studios for the most part in this blog post, pays me a commission directly. Anything I make from these, go directly into the running of my blog, YouTube channel and Instagram fresh and fun for you.

Thanks again for stopping by! Lots of love and happy crafting from Erica

You can find me on various social media platforms if you want to see more of my work

My blog (that’s right here)

Instagram

My YouTube channel

CaCaCraft on Facebook

Celebrating YouTube Milestones with Friends!

Welcome to a video hop celebrating 3 of our friends – Ardyth, Kathya, and Jenny. They all recently reached 5k subscribers on YouTube, so they are co-hosting a hop full of happy cards to celebrate and I was lucky enough to get invited to the celebrations! This is the blog post for my video.

There is a link to my YouTube video HERE and you can also find the whole hop list of participants is on Ardyth, Kathya and Jenny’s blogs.

Ok, now I’m quickly show off my cards and I actually love them both!

We also have a number of fabulous sponsors and prizes that will be awarded randomly throughout the hop to commenters, so the more you hop and comment, the better your chance of winning a prize! Deadline for comments is June 5 and prizes will be announced on Ardyth, Jenny and Kathya’s blogs on June 6. Prizes must be claimed by June 30.

I have used the GOOOOORGEOUS Botan Peony stamp from Picket Fence Studios directly onto the card base. With the help of my MISTI and Copic friendly Blackout Detail Ink from Ink On 3, I stamped up the flower in one corner, turned it around and then stamped it in exactly the same spot on the other side.

I coloured the first one with Copics with a flicking technique, leaving lots of white space. The markers used are RV69, RV09, RV04, RV52, Y17, Y13 and Y11.

To stick to the celebration theme of this hop, I have used the Celebrate word diecut from MFT Stamps. Many, many times in fact. I cut it out of white card stock first, and then once out of black card stock. These I layered up with my beloved liquid glue from Lawn Fawn. Sadly, this fan-tabulous die-namic is retired! Waaaaah!!

I did two while I was on a roll, one is finished with the black card stock and one with the white. Both have been doubly heat-embossed with clear embossing powder to create a nice, shiny puffy sticker look.

I finished the card off with a generous helping of Pretty Pink Posh sequins, adhered with Glossy Accents. The ones I have used are from their Sparkling Clear Mix and I love them. The Man thinks I over-sequinise (which is totally a word now, even though he’s wrong).

With this card done, I decided I loved it so much that I made another one! With a bit of a twist, of course. As I had the Peony stamp in my MISTI still, it was quick work stamping up another card panel. On this one I added more colour to the petals and also filled in the space behind the flowers with Cool Grays.

This feels a lot more dramatic than the white one! I did add some white details with a white Posca pen to bring more white into the panel, as I felt it was perhaps a little bit too colourful.

To add even more white, I used the white Celebrate word die and that was just the thing for it. This one also has clear embossing powder on it, two layers, to create that shiny look. Which has not been captured very well in the photos, sadly.

This one got sequins added too. In almost the same spots as the same white one.

Next to each other they look quite different, despite having the exact same layout. Isn’t it amazing to see how things can change just by adding dark spaces or keeping white ones? I absolutely love this dreamy Botan Peony stamp and have gotten so much use out of it. If you like big flowers (and you can not lie) this one is definitely one to add to your stash.

Well, that’s it from me for today but don’t forget to check out the video I made for these cards as well as the rest of the video hop! There are so many incredibly talented card makers lined up, you will be absolutely spoilt rotten with inspiration and gorgeous projects. Oh and prizes from these sponsors!

You can find me on various social media platforms if you want to see more of my work

My blog (that’s right here)

Instagram

My YouTube channel

CaCaCraft on Facebook

Affiliate links below to Ellen Hutson shop, at no extra cost to you. The other links in the blog post are to various other shops. None of the links will cost you anything extra at all, but if you shop using these, I will get a small commission directly from the company it goes to. More importantly though, it will help strengthen my relationship with them so thank you if you choose to support me like this.

Picket Fence Studios April Release! Rainbow Friendship Wreath cards.

Hi guys!

Today is the 14th, which means the April release from Picket Fence Studios is live! Yay! I’ve got a video up on my YouTube channel showing off the stamps and stencils, as well as some of the dies.

For the cards I am going to show you today, I have used the BFF My Tribe stamp. One on Copic Friendly paper and one on Bristol Vellum paper. Both are stamped up with the Black Hybrid ink, and the Bristol one was stamped again with the Embossing Pad from WOW! And heat embossed with clear embossing powder. In between stamping, I cleaned off the black ink with the Stamp Scrubber. Of course I used the Mini MISTI for the stamping.

I used Zig Clean Color markers on the Bristol Vellum panel. I did the sleeves in a rainbow colour, without adding any water to keep the colours vibrant.

On the second panel I used Copics and tried keeping the colours and shading as close to the Zig Coloring as possible. The hands are done in different shades of skin colours. All the nails got my usual signature nail polish colour of hot pink. The current state of my nails is atrocious though. Thanks Covid-19.

Once all the colouring was done, I trimmed down the panels a little so they’d measure 5.25”x4”. Both of these got the sentiment ‘Oh please, we knew you could do it’ from the I Freaking Love You stamp set. I used the Mini MISTI to make sure they stamped properly. The ink is again the Black Hybrid ink.

To finish off the cards I adhered the panels to white card bases. I considered adding some sequins as I’m back on my sequins craze, however I managed to restrain myself. They are lovely enough as they are and sometimes less is more. This BFF My Tribe stamp has been added to my ‘Love it’ list!

With that, I’m done for today. I have used compensated affiliate links in this post, as usual. They do not cost you anything at all, but if you use them I will get a small commission from the company directly at no extra cost to you whatsoever. When you use these, it helps strengthen my collaboration with the companies and that’s the most important part to me, so thank you in advance for the support and encouragement. I really appreciate it!

Lots of love and happy crafting from Erica

Have a Dinomite Halloween!

Boo!

I know it’s a bit early for trick or treating but I simply could not resist making a few Halloween cards with the super adorable little dinosaur from the Dinomite Halloween set. This one is from the Essentials by Ellen September release. If you missed my big news (eeep!) that I was a guest designer for Ellen Hutson in their release hop, check out that post HERE.

For these cards I have done my usual thing of using the same stuff, but changing up colours and add-ons for different looks. I will link all the products I’ve used at the bottom of this post, as well as throughout, in case you want to grab one or two.. or five… (no judgement!) for yourself.

As I knew I was going to do some ink blending on both of the cards, I started out by cutting out two 5.5″x4.25″ panels out of Bristol Vellum card stock. After using my anti-static tool on both of them I placed them in my MISTI, and then added the images I wanted from the Dinomite Halloween set as well as the Booyah set.

I’ve used Embossing ink from Inkon3 on both, and Arctic White embossing powder on one and Black on the other. After setting these with my heat-gun, they immediately look different!

I’ve used Distress Oxide inks for the ink blending and the rainbow-a-licious Blender Brushes from Taylored Expression. They are so pretty and colourful, I’d love to have a set just as decoration in my craft room! But that would be crazy… right? You can also use the Life Changing Blender Brushes from Picket Fence Studios.

Ok, back to the cardmaking! On this first panel you can see how it looks right after the ink blending is done. From top to bottom I’ve used Ripe Persimmon, Spiced Marmalade, Wild Honey, Mustard Seed and Squeezed Lemonade. The white embossing isn’t very white at all, is it? This used to bug me so badly until I realised I can just wipe it off, lol!

To begin with, I gently rub an old kitchen towel over the images and then I go over them again with a very lightly wet paper towel. It makes such a difference!

On the panel with the black heat embossing I used Squeezed Lemonade, Mustard Seed, Wild Honey, Carved Pumpkin, Spiced Marmalade, Ripe Persimmon, Wilted Violet, Dusty Concord and Seedless Preserve. I think it would have looked better with more reds and not have the Seedless Preserve on it but oh well.

You would think it wouldn’t be necessary to do it on the black heat embossing but I did, and it really made the images pop!

My first dino was coloured purple. I’m not really a big fan of purple for myself but I LOVE purple dinosaurs for some reason. This one got a few accessories done too. I used all the markers in the photo to do the colouring, although the Cool Greys I used on the hat, his tummy and freckles are not pictured.

The second dino was done in bright teal and yellows!

Once I had all my images coloured in and cut out, using the coordinating Dinomite Halloween designer dies, I set about putting the cards together. After pairing up accessories and adding the dinos to the cards I decided to also use the Boo & Treat word dies to add one final flourish. I cut them out of both white card stock and black to see what looked best.

Originally I thought about layering these up but it just didn’t look right. I’m not sure why as usually I love that look. Next I tried adding some colour to the bottom of the white. It’s just a little bit of leftover Mustard Seed and Spiced Marmalade inks on the brushes. I didn’t even need to add more.

In the end though, I used the black Boo on one and the black Treat on the second card.

It turned out so fun with the mix of heat embossed sentiments and images and the added diecut word. Plus I love that little mask for the dino too!

I think the choice of black Boo & Treat diecuts was the right one. They just pop a bit more, don’t you think? On this card I also added a bunch of pumpkins to cover up the larger candy corn image. Again, just to change things up a little bit without making any drastic changes.

Well, that’s it from me for today! Thank you so much for stopping by and I hope you enjoyed these cards. If you decide to pick up a few of these fun Ellen Hutson goodies, I’d be so grateful if you’d consider using my affiliate links when you shop. Every little helps and any money I make goes directly to the running of this blog, my YouTube channel and giving you all fun and creative content. Thank you so much for your support in keeping my dream going, I really, really appreciate it!

Lots of love and happy crafting from Erica

You can also find me on various social media!

YouTube

Instagram

Facebook

Blog